80812 tkim/d1504ea tsim tb-00000346/13002 tsim ta-3357 no.7128-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 mch3105/mch3205 bipolar transistor (?) 50v, (?) 3a, low v ce ( sat ) , ( pnp ) npn single mcph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applicaitons ? dc / dc converters, relay drivers, lamp drivers, motor drivers, ash features ? adoption of fbet, mbit processes ? large current capacity ? low collector-to-emitter saturation voltage ? high-speed switching ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm) ? high allowable power dissipation speci cations ( ) : mch3105 absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--50)80 v collector-to-emitter voltage v ces (--50)80 v v ceo (--)50 v emitter-to-base voltage v ebo (--)6 v collector current i c (--)3 a collector current (pulse) i cp (--)6 a base current i b (--)600 ma collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 0.8 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7019a-004 ordering number : EN7128B product & package information ? package : mcph3 ? jeita, jedec : sc-70, sot-323 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking electrical connection 1 : base 2 : emitter 3 : collector mcph3 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 12 3 0 to 0.02 ae lot no. lot no. ce lot no. lot no. mch3205 mch3105 tl 3 2 1 mch3205 3 2 1 mch3105 mch3105-tl-e mch3205-tl-e
mch3105 / mch3205 no.7128-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =(--)40v, i e =0a (--)1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)1 a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)500ma (360)380 mhz output capacitance cob v cb =(--)10v, f=1mhz (24)13 pf collector-to-emitter saturation voltage v ce (sat)1 i c =(--)1a, i b =(--)50ma (--100)80 (--200)120 mv v ce (sat)2 i c =(--)2a, i b =(--)100ma (--185)140 (--500)210 mv base-to-emitter saturation voltage v be (sat) i c =(--)2a, i b =(--)100ma (--)0.88 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--50)80 v collector-to-emitter breakdown voltage v (br)ces i c =(--)100 a, r be =0 (--50)80 v v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)6 v turn-on time t on see speci ed test circuit. (30)35 ns storage time t stg (230)300 ns fall time t f (15)22 ns switching time test circuit ordering information device package shipping memo mch3105-tl-e mcph3 3,000pcs./reel pb free mch3205-tl-e mcph3 3,000pcs./reel v r r b v cc =25v v be = --5v + + 50 input outpu t r l 100 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =10i b1 = --10i b2 =1a (for pnp, the polarit y is reversed.) collector-to-emitter voltage, v ce -- v collector current, i c -- a collector-to-emitter voltage, v ce -- v i c -- v ce i c -- v ce collector current, i c -- a it03963 it03964 mch3105 0 --0.2 0 --0.4 --0.6 --0.8 --1.0 0.4 0 0.8 1.2 1.6 2.0 --2.0 --1.6 --1.2 --0.8 --0.4 mch3205 0 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 i b =0 i b =0 --2ma --4ma --6ma --8ma --10ma --30ma --40ma --20ma 5ma 40ma 60ma 20ma 10ma 80ma 100ma
mch3105 / mch3205 no.7128-3/7 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 10 2 3 5 7 100 --1.0 23 57 --10 23 57 mch3105 f=1mhz collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 0.1 23 57 1.0 23 57 10 23 57 2 10 2 3 5 7 100 3 5 7 it03971 it03972 it03967 it03969 it03968 it03970 2 10 3 5 7 2 3 5 7 100 1000 h fe -- i c dc current gain, h fe collector current, i c -- a ta=75 c --25 c mch3105 v ce = --2v 25 c h fe -- i c dc current gain, h fe collector current, i c -- a ta=75 c --25 c mch3205 v ce =2v 25 c 2 100 2 3 5 7 1000 3 5 7 f t -- i c gain-bandwidth product, f t -- mhz collector current, i c -- a f t -- i c gain-bandwidth product, f t -- mhz collector current, i c -- a 23 57 23 57 23 --0.01 --0.1 --1.0 23 57 --0.01 --0.1 23 57 --1.0 23 5 2 100 2 3 5 7 1000 3 5 7 23 57 0.01 0.1 23 57 1.0 23 5 mch3205 v ce =10v 2 3 5 7 100 2 3 5 7 1000 10 23 57 0.1 23 57 1.0 23 0.01 mch3105 v ce = --10v mch3205 f=1mhz base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a it03965 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a it03966 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0.2 0.4 0.6 0.8 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 mch3105 v ce = --2v ta=75 c 25 c --25 c 0 0.5 1.0 1.5 2.0 2.5 3.0 mch3205 v ce =2v ta=75 c 25 c --25 c
mch3105 / mch3205 no.7128-4/7 1.0 0 0.8 0.6 0.2 0.4 v ce (sat) -- i c collector current, i c -- a --25 c mch3105 i c / i b =50 v ce (sat) -- i c collector current, i c -- a mch3205 i c / i b =50 --25 c ta=75 c ta= --25 c it03975 it03976 v be (sat) -- i c collector current, i c -- a v be (sat) -- i c collector current, i c -- a it03977 it03978 7 5 3 2 --10000 --1000 7 5 3 2 --100 7 5 3 2 23 57 --0.1 --0.01 23 57 --0.1 --0.01 23 57 --1.0 23 57 --10 23 57 0.1 0.01 23 57 1.0 23 5 23 57 0.1 0.01 23 57 1.0 23 5 23 57 --1.0 23 57 --10 --10 --1000 7 5 3 2 --100 5 3 2 1000 7 5 3 2 100 5 3 2 1000 7 5 3 2 7 5 3 2 100 10 25 c 25 c 25 c 75 c ta= --25 c 25 c 75 c ta=75 c mch3105 i c / i b =50 mch3205 i c / i b =50 collector dissipation, p c -- w ambient temperature, ta -- c 20 060 40 80 100 140 120 160 p c -- ta it03981 mounted on a ceramic board (600mm 2 ? 0.8mm) 0.1 1.0 10 23 57 23 57 23 57 0.1 1.0 2 3 5 7 0.01 2 3 5 7 10 2 3 5 7 a s o collector current, i c -- a collector-to-emitter voltage, v ce -- v i c =3a i cp =6a mch3105 / mch3205 ta=25 c single pulse mounted on a ceramic board (600mm 2 ? 0.8mm) it03980 base-to-emitter saturation voltage, v be (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv base-to-emitter saturation voltage, v be (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv 1ms dc operation 100ms 10ms 500 s 100 s v ce (sat) -- i c collector current, i c -- a --25 c mch3105 i c / i b =20 v ce (sat) -- i c collector current, i c -- a mch3205 i c / i b =20 --25 c ta=75 c it03973 it03974 7 5 3 2 --10000 --1000 7 5 3 2 --100 7 5 3 2 23 57 --0.1 --0.01 23 57 0.1 0.01 23 57 1.0 23 5 23 57 --1.0 23 57 --10 --10 1000 7 5 3 2 7 5 3 2 100 10 25 c 25 c ta=75 c collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv
mch3105 / mch3205 no.7128-5/7 taping speci cation mch3105-tl-e, mch3205-tl-e
mch3105 / mch3205 no.7128-6/7 outline drawing land pattern example mch3105-tl-e, mch3205-tl-e mass (g) unit 0.007 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
mch3105 / mch3205 ps no.7128-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
